▪ The controller is designed as a floor standing cabinet, each signal bus circuit is of plug-in type, and the system capacity can be easily and conveniently expanded.
▪ Combine with the smart detector to form a distributed smart fire alarm system;
▪ All circuits use the non-polarity two-bus system;
▪ 7" LCD display;
▪ RS-485, RS-232 and CAN interfaces are used for outgoing protocols;
▪ The RS-485② interface can be connected to the CRT color display system;
▪ Sixteen 16-point manual bus control panels can be configured to manually control the bus-enabled external control devices in the firefighting system.
▪ Sixteen 8-point manual direct control panels can be configured to manually control major devices in the firefighting system.
▪ A power supply dedicated to the firefighting system can be configured to provide 24 VDC power supply for the linkage control equipment;
▪ The 485① interface can be used to extend the fire broadcast control panel and fire telephone control panel to form a fire broadcast & telephone system;
▪ Alarm, linkage and operation information can be printed in real time or collectively.

Models and specifications	JB-TG-TY2001
Outline dimensions	1775×600×600mm
Max. power consumption	≤300W
Rated voltage	AC220V/50Hz
Wire system	Non-polarity two-bus
Contact output	One fire alarm relay/one fault relay, contact capacity 24 VDC/2 A
Communication capacity	Up to 64 alarm controllers of the same specification can be configured through the CAN bus
Operating environment	Temperature 0°C to 40°C Relative humidity ≤ 95% (without condensation)
Alarm capacity	a. Up to 16 circuits (1 to 16 circuits) can be added and up to 254 points can exist in a single circuit. The encoding address is 1 to 254. b. Up to 16 sets of multi-bus linkage panels can be configured and each set controls 8 direct control points. c. Up to 16 sets of manual bus control panels can be configured and each set controls 16 control groups.